User Tools

Site Tools


faq:email:mail_setup_outlook_express_pop3

This is an old revision of the document!


Email Setup Guide for Outlook Express (POP3)


Example to setup Outlook Express with Afteroffice service.
Full name: John Liew
Email: johnliew@lookafter.com
POP3 and SMTP server: mail.lookafter.com

To setup your new account in Outlook Express, follow these steps:

  1. Select “Accounts…“ from the “Tools” menu in Outlook Express.


  2. Click at the “Add” button, and select “Mail…“.


  3. Enter your full name, in this example “John Liew”, and click “Next” when done:


  4. Enter your full email, in this example ” johnliew@lookafter.com ”, click “Next” when done.


  5. Select “POP3” in “My incoming mail server”, and enter your POP3 server, in this example “mail.lookafter.com”. Enter your SMTP server, same as the POP3 server. Click “Next” when done:


  6. Enter your full email as the “Account name”, and enter the password here. It is optional to set “Remember password” here to ON or OFF. Click “Next” when done.


  7. Click “Finish” to confirm.


  8. On the following window, click into “Properties”.


  9. Go to the Servers tab. Make sure that “My server requires authentication” is selected. (You may further click into “Settings” to check if “Use same settings as my incoming mail server” is selected)


  10. Go to the Advanced tab. Make sure that the “Outgoing mail (SMTP)“ is 587, and “Incoming mail (POP3)“ is 110.


  11. Click “Apply” and “OK” to save the settings.
  12. Outlook Express is ready now. Click “Send/Recv” to start downloading email from the mail server.
faq/email/mail_setup_outlook_express_pop3.1451443226.txt.gz · Last modified: 2015/12/30 10:40 by vikki